Leave flat, static surfaces behind. The Deep Wave concrete panel series, one of the most striking reflections of modern architecture, adds fluid dynamism to your walls with its elegant, successive wave forms. This special design, which maximizes the play of light and shadow, elevates the naturalness of raw concrete panels to an artistic dimension.
Our wavy concrete panel models, which stand out with their eye-catching curves, give you the realistic feel of concrete when you touch them, creating a rhythmic and aesthetic atmosphere in your space. Especially when supported by spot or linear LED lighting, you can see the shadows dancing on your wall thanks to the 3D concrete panel structure. The first choice of architects seeking to create modern spaces, this series also gives the space an acoustic softness with its corrugated concrete panel appearance.
Not only eye-catching but also extremely durable, this series can be safely used as decorative wall panels in bathrooms or on exterior facades thanks to its resistance to water and moisture. Its lightweight structure, which has an A1 class fire resistance certificate, does not put unnecessary load on your building, unlike heavy cast concrete. Our wave-patterned wall panel series, available in 60×60 cm, 60×120 cm, and 120×240 cm sizes, can be quickly installed on the frame with screws or direct gluing in sizes suitable for your project.
Type, Category, Class
: NT, Category A, Class 2
Fire Response
Non-combustible, Class A1 building material according to EN 13501-1
Hazardous substance release
There is no emission of any harmful substances.
Water Impermeability
: Waterproof
Hot Water Effect
: Heat-resistant, >0.75 (RL ratio)
Freezing-Thawing Effect
Frost-resistant, >0.75 (RL ratio)
Moisture-Dependent Movement
: 0,05%+0,01
Modulus of elasticity
>4000 N/mm2
Thickness
: +10% (k: sheet thickness) 9 mm, 11 mm, 13 mm, 15 mm, 17 mm
Height and width
: 60x60cm – 60x120cm – 120x240cm
standard series production dimensions. Customised dimensions are possible depending on the project.
Panel Weights
: 8–9 kg /+5% m²
14–15 kg/+5% m²
Assembly Method
Our panels are installed with the necessary infrastructure provided according to the project. Installation is possible on both exterior and interior walls using profile support, screwing and/or gluing. For
the direct wall gluing system, it is sufficient for the wall to be plastered. Please contact us for technical information.
Our W-Wall natural concrete cladding panels are manufactured by our company, BETONAX. Type NT, reinforcement fibre randomly distributed in particle form, category A, large size, length and width tolerance level 1, class 2, apparent density min. 1g/cm3, these are ready-made panels with a natural concrete appearance, used for interior and exterior wall and ceiling cladding.Due to their light weight, they do not add load to the building and are particularly preferred for exterior walls, applied using adhesive and/or screw methods.
Our W-Wall panels are mass-produced in sizes of 0.60×0.60 cm, 0.60×1.20 cm, and 1.20×2.40 cm, as listed on our website and in our catalogue. In addition, they can be produced in custom sizes, colours, patterns, and textures according to architectural project requirements.
Our concrete panels, which have a natural concrete appearance, are certified to meet European standards (CE certification).
For technical details and installation specifications of our concrete panels, please refer to our menu list.
With its rhythmic and fluid design, our Deep Wave series delivers excellent results on any surface where attention is desired:
